Cisco 7911 Manual Download

Page: 31 / 76

Basic Call Handling

Cisco Unified IP Phone 7906G and 7911G for Cisco Unified CallManager 5.01 (SCCP and SIP)

Starting or Joining a Meet-Me Conference Call

Meet-Me conferencing allows you to start or join a conference by dialing the conference number.

If you want to...

Then...

Start a Meet-Me conference

Obtain a Meet-Me phone number from your system administrator.

Distribute the number to participants.

When you are ready to start the meeting, go off-hook to invoke a
dial tone, then press

MeetMe.

Dial the Meet-Me conference number.

Participants can now join the conference by dialing in.

Note

Participants hear a busy tone if they call the conference before the
initiator has joined. In this case, participants must call back.

Participate in a Meet-Me
conference

Dial the Meet-Me conference number (provided by the conference
initiator).

Note

You will hear a busy tone if you call the conference before the
initiator has joined. In this case, try your call again.

End a Meet-Me conference

All participants must hang up.

The conference does not automatically end when the conference
initiator disconnects.

Summary of Contents for 7911













































































Search results

Summary of Contents for 7911

Reviews:

Related manuals for 7911

Brands by name

Popular brands

Cisco 7911, Manual

Search results

Summary of Contents for 7911

Reviews:

Related manuals for 7911

Brands by name

Popular brands