Cisco 500 Series, Configuration Manual

Page: 103 / 1140

6-5
Cisco Security Appliance Command Line Configuration Guide
OL-12172-03
Chapter 6 Adding and Managing Security Contexts
Configuring Resource Management
For example, you might want to create a class that includes the admin context that has no limitations.
The default class has all resources set to unlimited by default.
• To set a particular resource limit, enter the following command:
hostname(config-resmgmt)# limit-resource [ rate ] resource_name number [ % ]
For this particular resource, the limit overrides the limit set for all . Enter the rate argument to s et
the rate per second for certain resources. For resources that do not have a system limit, you cannot
set the percentage (%) between 1 and 100; you can only set an absolute value. See
Table 6-1 for
resources for which you can set the rate per second and which to not have a system limit.
Table 6-1 lists the resource types and the limits. See also the show resource types command.