manualshive.com logo in svg

Cisco 500 Series, Configuration Manual

The Frigidaire 500 Series offers top-of-the-line performance and convenience for your kitchen. To ensure proper usage and maintenance, we provide a comprehensive Use And Care Manual for free download. Obtain your manual from manualshive.com and unlock the full potential of your Frigidaire 500 Series appliance effortlessly.

Share
Download
background image

 

30-25

Cisco Security Appliance Command Line Configuration Guide

OL-12172-03

Chapter 30      Configuring Connection Profiles, Group Policies, and Users

  Configuring Connection Profiles

hostname(config)# 

tunnel-group RadiusServer general-attributes

hostname(config-tunnel-general)# 

authentication server-group RADIUS

hostname(config-tunnel-general)# 

accounting-server-group RADIUS

hostname(config-tunnel-general)# 

tunnel-group RadiusServer webvpn-attributes

hostname(config-tunnel-webvpn)# 

group-alias “Cisco Remote Access” enable

hostname(config-tunnel-webvpn)# 

group-url http://www.cisco.com enable

hostname(config-tunnel-webvpn)# 

group-url http://192.168.10.10 enable

hostname(config-tunnel-webvpn)# 

For a more extensive example, see 

Customizing Login Windows for Users of Clientless SSL VPN 

sessions, page 30-26

.

Step 6

To specify the DNS server to use for a connection profile for clientless SSL VPN sessions, enter the 

dns-group

 command. The default value is DefaultDNS:

hostname(config-tunnel-webvpn)# 

dns-group 

{

hostname

 | 

ip_address

}

hostname(config-tunnel-webvpn)# 

The dns-group command resolves the hostname to the appropriate DNS server for the connection profile. 
For example, to specify the use of the DNS server named server1, enter the following command:

hostname(config)# 

name 10.10.10.1 server1

hostname(config-tunnel-webvpn)# 

dns-group server1

hostname(config-tunnel-webvpn)# 

Step 7

(Optional) To specify a VPN feature policy if you use the Cisco Secure Desktop Manager to set the 
Group-Based Policy attribute to “Use Failure Group-Policy” or “Use Success Group-Policy, if criteria 
match,” use the 

hic-fail-group-policy

 command. The default value is DfltGrpPolicy.

hostname(config-tunnel-webvpn)# 

hic-fail-group-policy 

name

hostname(config-tunnel-webvpn)# 

Name

 is the name of a group policy created for a connection profile for clientless SSL VPN sessions. 

This policy is an alternative group policy to differentiate access rights for the following CSD clients:

•

Clients that match a CSD location entry set to “Use Failure Group-Policy.”

•

Clients that match a CSD location entry set to “Use Success Group-Policy, if criteria match,” and 
then fail to match the configured Group-Based Policy criteria. For more information, see the 

Cisco 

Secure Desktop Configuration Guide for Cisco ASA 5500 Series Administrators

.

The following example specifies an alternative group policy named group2:

hostname(config-tunnel-webvpn)# 

hic-fail-group-policy group2

hostname(config-tunnel-webvpn)# 

Note

The security appliance does not use this attribute if you set the VPN feature policy to “Always 
use Success Group-Policy.”

For more information, see the 

Cisco Secure Desktop Configuration Guide for Cisco ASA 5500 Series 

Administration Guide

.

Step 8

(Optional) To specify whether to override the group policy or username attributes configuration for 
downloading an AnyConnect or SSL VPN client, use the override-svc-download command. This feature 
is disabled by default.

The security appliance allows clientless, AnyConnect, or SSL VPN client connections for remote users 
based on whether clientless and/or SSL VPN is enabled in the group policy or username attributes with 
the 

vpn-tunnel-protocol

 command. The 

svc ask

 command further modifies the client user experience 

by prompting the user to download the client or return to the WebVPN home page.

Summary of Contents for 500 Series





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 500 Series

Samsung MX-T70 Manual preview
MX-T70
Brand: Samsung Pages: 60
Samsung MX-F630B Quick Manual preview
MX-F630B
Brand: Samsung Pages: 2
Samsung MM-ZB9 Manual De Instrucciones preview
MM-ZB9
Brand: Samsung Pages: 24
Samsung MM-B3 Manual Del Instrucción preview
MM-B3
Brand: Samsung Pages: 22
Samsung MAX-VJ650 Service Manual preview
MAX-VJ650
Brand: Samsung Pages: 23
LENCO MDV-8 User Manual preview
MDV-8
Brand: LENCO Pages: 27
Trane Tracer CH.530 RLC-SVU01B-E4 Owner'S Manual preview
Tracer CH.530 RLC-SVU01B-E4
Brand: Trane Pages: 60
Daewoo AXW-117 Service Manual preview
AXW-117
Brand: Daewoo Pages: 35
Autotrol 460i Operation And Maintenance Manual preview
460i
Brand: Autotrol Pages: 8
Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual preview
MERLIN LEGEND Release 7.0
Brand: Lucent Technologies Pages: 1082
StarLeaf GTm Quick Start preview
GTm
Brand: StarLeaf Pages: 2
Lutron Electronics RadioRA-SR Setup Manual preview
RadioRA-SR
Brand: Lutron Electronics Pages: 36
ClearOne Converge Pro Manual preview
Converge Pro
Brand: ClearOne Pages: 48
Atlona AT-UHD-HDVS-300-KIT Manual preview
AT-UHD-HDVS-300-KIT
Brand: Atlona Pages: 50
Panasonic SC-PM33DB Operating Instructions Manual preview
SC-PM33DB
Brand: Panasonic Pages: 24
Panasonic SC-HC20DBEB Operating Instructions Manual preview
SC-HC20DBEB
Brand: Panasonic Pages: 16
Panasonic SG-1060L Operating Instructions Manual preview
SG-1060L
Brand: Panasonic Pages: 31
Panasonic SC-AKX600 Operating Instructions Manual preview
SC-AKX600
Brand: Panasonic Pages: 20

Brands by name

Popular brands

Load more brands