manualshive.com logo in svg

Cisco 500 Series, Configuration Manual

The Frigidaire 500 Series offers top-of-the-line performance and convenience for your kitchen. To ensure proper usage and maintenance, we provide a comprehensive Use And Care Manual for free download. Obtain your manual from manualshive.com and unlock the full potential of your Frigidaire 500 Series appliance effortlessly.

Share
Download
background image

 

30-20

Cisco Security Appliance Command Line Configuration Guide

OL-12172-03

Chapter 30      Configuring Connection Profiles, Group Policies, and Users

  Configuring Connection Profiles

The authentication-server-group name identifies a previously configured authentication server or group 
of servers. Use the 

aaa-server

 command to configure authentication servers. The maximum length of 

the group tag is 16 characters.

You can also configure interface-specific authentication by including the name of an interface in 
parentheses before the group name. The following interfaces are available by default:

•

inside—Name of interface GigabitEthernet0/1

•

outside— Name of interface GigabitEthernet0/0

Other interfaces you have configured (using the 

interface

 command) are also available. The following 

command configures interface-specific authentication for the interface named outside using the server 
servergroup1 for authentication:

hostname(config-tunnel-general)# 

authentication-server-group (outside) servergroup1

hostname(config-tunnel-general)# 

Step 3

Optionally, specify the name of the authorization-server group, if any, to use. If you are not using 
authorization, go to Step 6. When you configure this value, users must exist in the authorization database 
to connect:

hostname(config-tunnel-general)# 

authorization-server-group

 

groupname

hostname(config-tunnel-general)# 

Use the 

aaa-server

 command to configure authorization servers. The maximum length of the group tag 

is 16 characters.

For example, the following command specifies the use of the authorization-server group FinGroup:

hostname(config-tunnel-general)# 

authorization-server-group

 

FinGroup

hostname(config-tunnel-general)# 

Step 4

Specify whether to require a successful authorization before allowing a user to connect. The default is 
not to require authorization.

hostname(config-tunnel-general)# 

authorization-required

hostname(config-tunnel-general)# 

Step 5

Specify the attribute or attributes to use in deriving a name for an authorization query from a certificate. 
This attribute specifies what part of the subject DN field to use as the username for authorization:

hostname(config-tunnel-general)# 

authorization-dn-attributes

 {

primary-attribute

 

[

secondary-attribute

] | 

use-entire-name

}

For example, the following command specifies the use of the CN attribute as the username for 
authorization:

hostname(config-tunnel-general)# 

authorization-dn-attributes CN

hostname(config-tunnel-general)# 

The authorization-dn-attributes are 

C

 (Country), 

CN

 (Common Name), 

DNQ

 (DN qualifier), 

EA

 

(E-mail Address), 

GENQ

 (Generational qualifier), 

GN

 (Given Name), 

I

(Initials), 

L

 (Locality), 

N

(Name), 

O

 (Organization), 

OU

 (Organizational Unit), 

SER

 (Serial Number), 

SN

 (Surname), 

SP

(State/Province), 

T

 (Title), 

UID

 (User ID), and 

UPN

 (User Principal Name).

Step 6

Optionally, specify the name of the accounting-server group, if any, to use. If you are not using 
accounting, go to Step 7. Use the 

aaa-server

 command to configure accounting servers. The maximum 

length of the group tag is 16 characters.:

hostname(config-tunnel-general)# 

accounting-server-group

 

groupname

hostname(config-tunnel-general)# 

For example, the following command specifies the use of the accounting-server group comptroller:

Summary of Contents for 500 Series





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 500 Series

Panasonic RX-DT610 Operating Instructions Manual preview
RX-DT610
Brand: Panasonic Pages: 45
Hama 00173143 Operating Instructions Manual preview
00173143
Brand: Hama Pages: 75
heat-timer Mini-MOD Installation And Operation Instruction Manual preview
Mini-MOD
Brand: heat-timer Pages: 36
Teac CR-K1 Service Manual preview
CR-K1
Brand: Teac Pages: 16
NAIM CONNECTIONS Manual preview
CONNECTIONS
Brand: NAIM Pages: 31
Pittway NOTIFIER CBC-CLASS 1 Manual preview
NOTIFIER CBC-CLASS 1
Brand: Pittway Pages: 20
Grundig M 2050 BT DAB+ Operating Manual preview
M 2050 BT DAB+
Brand: Grundig Pages: 85
Xilinx Zynq UltraScale+ User Manual preview
Zynq UltraScale+
Brand: Xilinx Pages: 86
Woodward 9907-026 Product Manual preview
9907-026
Brand: Woodward Pages: 32
Bang & Olufsen Beocenter 9300 User Manual preview
Beocenter 9300
Brand: Bang & Olufsen Pages: 11
btsr SMART CLEARER Operating Manual preview
SMART CLEARER
Brand: btsr Pages: 81
Raven RCM-Sprayer Hawkeye 2 Calibration And Operation Manual preview
RCM-Sprayer Hawkeye 2
Brand: Raven Pages: 124
Cattron CommandPro 23 Series User Manual preview
CommandPro 23 Series
Brand: Cattron Pages: 27
JVC DX-J10EE Service Manual preview
DX-J10EE
Brand: JVC Pages: 101
JVC =UX-J55V Instructions Manual preview
=UX-J55V
Brand: JVC Pages: 36
JVC 0802MWMMDWJEM Instructions Manual preview
0802MWMMDWJEM
Brand: JVC Pages: 74
Philips FW 356C Specifications preview
FW 356C
Brand: Philips Pages: 2
Philips FW 61 User Manual preview
FW 61
Brand: Philips Pages: 24

Brands by name

Popular brands

Load more brands