manualshive.com logo in svg

Cisco 2800 Series, Manual

The Cisco 2800 Series is a versatile network router designed to provide high-performance connectivity and advanced security features. With our website, you can easily access the Cisco 2800 Series user manual for free download, ensuring that you have all the necessary information to optimize your network experience.

Share
Download
background image

 

24

Basic Software Configuration Using the Setup Command Facility

OL-5992-01

  Examples of Using the Setup Command Facility to Configure Interface Parameters

 Do you want to map the remote machine's smds address to IP address? [yes]:

    IPX address for the remote interface: 

40.0060.34c6.90ed

1-Port, 4-Wire, 56-kbps DSU/CSU Configuration

The switched-56 WAN interface card is configured for dedicated or leased-line service by default, but 
it can also be configured for circuit-switched service, here known as 1-port, 4-wire 56-kbps DSU/CSU 
configuration. Depending on the type of data transmissions you typically use, you can configure the 
switched-56 WAN interface card for either circuit-switched service or dedicated-line service.

Generally, circuit-switched service is ideal for short-duration data transmissions or as an alternative 
route if a dedicated line fails. For example, circuit-switched service is ideal for sending electronic mail 
messages or doing such tasks as updating inventory and ordering records from one network database to 
another at the end of each day.

Dedicated service is ideal for heavy network traffic. Dedicated service is ideal if you need a constant 
network connection or you need connection for more than eight hours per day.

Switched Mode

The following is a sample configuration for a switched mode interface:

Do you want to configure Serial0/0/0 interface? [yes]:

   Some encapsulations supported are 

             ppp/hdlc/frame-relay/lapb/atm-dxi/smds/x25

  Choose encapsulation type   [ppp]:

Switched 56k interface may either be in switched/Dedicated mode

  Choose from either (switched/dedicated)  [switched]:

The following switched carrier types are to be set when in switched mode

(at&t, sprint or other)

  Choose carrier (at&t/sprint/other)  [other]:

Do you want to map the remote machine's ip address in dialer map? [yes]:

     IP address for the remote interface : 

1.0.0.2

Do you want to map the remote machine's ipx address in dialer map? [yes]:

    IPX  address for the remote interface : 

40.0060.34c6.90ed

Note

The setup command facility asks for only one telephone number for both IP and Internetwork Packet 
Exchange (IPX) (if enabled). 

Please enter the phone number to call : 

1234567890

  Configure IP on this interface? [yes]:

    IP address for this interface: 

1.0.0.1

    Subnet mask for this interface [255.0.0.0] :

    Class A network is 1.0.0.0, 8 subnet bits; mask is /8

Dedicated Mode

The following is a sample configuration for a dedicated mode interface:

Do you want to configure Serial0/0/0 interface? [yes]:

  Some encapsulations supported are 

            ppp/hdlc/frame-relay/lapb/atm-dxi/smds/x25

  Choose encapsulation type   [ppp]:

Summary of Contents for 2800 Series











































































































































































































































































Reviews:

No comments

Related manuals for 2800 Series

Arris Touchstone MG2402G User Manual preview
Touchstone MG2402G
Brand: Arris Pages: 8
Oki BMG7011 User Manual preview
BMG7011
Brand: Oki Pages: 70
Aaeon AIOT-IP6801 User Manual preview
AIOT-IP6801
Brand: Aaeon Pages: 29
ZyXEL Communications ZyWALL USG 2000 Quick Start Manual preview
ZyWALL USG 2000
Brand: ZyXEL Communications Pages: 120
Acer SX2830 Service Manual preview
SX2830
Brand: Acer Pages: 113
Nortel MCC 3100 User Manual preview
MCC 3100
Brand: Nortel Pages: 134
Nortel Remote Office 9150 Installation And Administration Manual preview
Remote Office 9150
Brand: Nortel Pages: 570
Novell ACCESS MANAGER 3.1 SP1 - ADMINISTRATION Installation Manual preview
ACCESS MANAGER 3.1 SP1 - ADMINISTRATION
Brand: Novell Pages: 42
Novatel SA2100 User Manual preview
SA2100
Brand: Novatel Pages: 88
eQ-3 MAX! Cube Operating Manual preview
MAX! Cube
Brand: eQ-3 Pages: 44
Dynamix 2FXS/2FXO-B User Manual preview
2FXS/2FXO-B
Brand: Dynamix Pages: 122
Eaton POW-R-COMMAND 1000 Quick Start Manual preview
POW-R-COMMAND 1000
Brand: Eaton Pages: 8
Fanvil PA3 User Manual preview
PA3
Brand: Fanvil Pages: 70
Planet Networking & Communication MH-5001 User Manual preview
MH-5001
Brand: Planet Networking & Communication Pages: 235
ICPDAS GW-7238D User Manual preview
GW-7238D
Brand: ICPDAS Pages: 52
Hybertone SMB128 Quick Installation Manual preview
SMB128
Brand: Hybertone Pages: 4
Hybertone HT-342 User Manual preview
HT-342
Brand: Hybertone Pages: 34
Z-Wave Z-Box User Manual preview
Z-Box
Brand: Z-Wave Pages: 28

Brands by name

Popular brands

Load more brands