Chapter 3 Setting Up the Cisco Secure ACS HTML Interface
Protocol Configuration Options for RADIUS
3-12
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
Tip
You must have your network devices configured before you can select, on the
Interface Configuration page, a type of setting for further configuration.
From the Interface Configuration page, when you click to select a type of
RADIUS setting to configure, the HTML interface displays the corresponding list
of available RADIUS attributes and associated check boxes. If you have selected
the Per-user /RADIUS Attributes check box in Interface Configuration:
Advanced Options, a User check box appears alongside the Group check box for
each attribute. Otherwise, only the Group check box for each attribute appears. By
selecting check boxes in a list of attributes, you determine whether the
corresponding (IETF) RADIUS attribute or vendor-specific attribute (VSA) is
configurable from the User Setup and Group Setup sections.
RADIUS
(Cisco
VPN
5000)
Yes
No
No
No
No
No
No
Yes
No
No
RADIUS
(Juniper)
Yes
No
No
No
No
No
No
No
Yes
No
RADIUS
(Nortel)
Yes
No
No
No
No
No
No
No
No
Yes
RADIUS
(iPass)
Yes
No
No
No
No
No
No
No
No
No
Table 3-1
RADIUS Listings in Interface (continued)
Configure
this Type
of AAA
Client...
...and the Interface Configuration Page Lists These Types of Settings
RADIUS
(IETF)
RADIUS
(Cisco
Aironet)
RADIUS
(BBSM)
RADIUS
(Cisco
IOS/PIX)
RADIUS
(Micro-
soft)
RADIUS
(Ascend)
RADIUS
(Cisco
VPN
3000)
RADIUS
(Cisco
VPN
5000)
RADIUS
(Juniper)
RADIUS
(Nortel)