7-25
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
Chapter 7 Setting Up and Managing User Accounts
Advanced User Authentication Settings
Step 6
Do one of the following:
•
If you are finished configuring the user account options, click Submit to
record the options.
•
To continue to specify the user account options, perform other procedures in
this chapter, as applicable.
Configuring a Shell Command Authorization Set for a User
Use this procedure to specify the shell command authorization set parameters for
a user. You can choose one of five options:
•
None—There is no authorization for shell commands.
•
Group—For this user, the group-level shell command authorization set
applies.
•
Assign a Shell Command Authorization Set for any network device—One
shell command authorization set is assigned, and it applies all network
devices.
•
Assign a Shell Command Authorization Set on a per Network Device
Group Basis—Particular shell command authorization sets are to be
effective on particular NDGs. When you select this option, you create the
table that lists what NDG associates with what shell command authorization
set.
•
Per User Command Authorization—Enables you to permit or deny specific
Cisco IOS commands and arguments at the user level.
Before You Begin
•
Ensure that a AAA client has been configured to use as the
security control protocol.
•
In the Advanced Options section of Interface Configuration, ensure that the
Per-user /RADIUS Attributes check box is selected.
