4-19
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
Chapter 4 Setting Up and Managing Network Configuration
AAA Client Configuration
Step 5
If you are using NDGs, from the Network Device Group list, select the NDG to
which this AAA client should belong, as applicable. To set this AAA client to be
independent of NDGs, select Not Assigned.
Step 6
From the Authenticate Using list, select the correct network security protocol, as
applicable.
Tip
If you are uncertain which protocol to select on the Authenticate Using list, see
AAA Client Configuration Options, page 4-11
.
Step 7
Change the status of any or all of the following three options, as applicable:
•
Single Connect AAA Client
•
Log Update/Watchdog Packets from this Access Server
•
Log RADIUS tunneling Packets from this Access Server
Step 8
To save your changes and apply them immediately, click Restart.
Tip
To save your changes and apply them later, click Submit. When you are ready to
implement the changes, click System Configuration, click Service Control, and
then click Restart.
Note
Restarting the service clears the Logged-in User report and temporarily
interrupts all Cisco Secure ACS services. This affects the Max Sessions
counter.
Deleting a AAA Client
To delete a AAA client, follow these steps:
Step 1
In the navigation bar, click Network Configuration.
Result: The Network Configuration page opens.
