Chapter 4 Setting Up and Managing Network Configuration
Network Device Group Configuration
4-28
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
Cisco Secure ACS—single discrete devices such as an individual router or
network access server, and an NDG; that is, a collection of routers or AAA
servers.
Caution
To see the Network Device Groups table in the HTML interface, you must have
the Network Device Groups option selected on the Advanced Options page of the
Interface Configuration section. Unlike in other areas of Interface Configuration,
it is possible to remove from sight an active NDG if you deselect the Network
Device Groups option. Therefore, if you choose to configure NDGs, make sure
you leave the Network Device Groups option selected on the Advanced Option
page.
This section contains the following procedures for working with NDGs:
•
Adding a Network Device Group, page 4-28
•
Assigning an Unassigned AAA Client or AAA Server to an NDG, page 4-29
•
Reassigning a AAA Client or AAA Server to an NDG, page 4-30
•
Renaming a Network Device Group, page 4-31
•
Deleting a Network Device Group, page 4-31
Adding a Network Device Group
You can assign users or groups of users to NDGs. For more information, see one
of the following sections:
•
Setting Enable Password Options for a User, page 7-35
•
Setting Enable Privilege Options for a User Group, page 6-18
To add an NDG, follow these steps:
Step 1
In the navigation bar, click Network Configuration.
Result: The Network Configuration page opens.