F I N A L D R A F T - C I S C O C O N F I D E N T I A L
3-8
Cisco ONS 15216 EDFA2 Operations Guide
78-16033-01
Chapter 3 Installation
Communications
Step 5
In the Connect To dialog box (
Figure 3-2
), click Direct to Com1 in the Connect using field. Click OK.
Figure 3-2
HyperTerminal Connect To Dialog Box
Step 6
Configure the Port Settings in the COM1 Properties dialog box as shown in
Figure 3-3 on page 3-9
. The
Port Settings must be configured as follows:
•
Bits per second—19200
•
Data bits—8
•
Parity—None
•
Stop bits—1
•
Flow control—None
Click OK when done.
