Circontrol Raption 50 Gen2 Series, Service Manual

Page: 15 / 96

11
1- DC Contactor. 12Vdc.
120A(KM7.1/KM7.2/KM8.2/
KM8.3) 2- Diode rectifier 162A (E6.1)
with forced ventilation (M6.1)
3- Fuse holder 1pole 14x51
(F6.1/ F6.2/F6.3/F6.4)
4- Emergency button (S9.1) 5- Isolation protection
device(B15.1) 6- Heater with fan 400W
(M13.3)
7- Ceramic fuse 5x20 1A (F3.1/
F3.2/F3.3/F3.4) 8- Miniature circuit breaker 4
poles 25A class C (Q4.1/Q4.2/
Q4.3/Q4.4) 9- Conctactor 10A/230VAC
GMR-4M 2a2b (K13.3)
10- Three-phase MID energy
meter (P9.1) 11- AC MCB (Q9.1) 12- Auxiliar contact 6A
(Q9.2)
13- RCD protection (T4.1) 14- RCD protection (T9.1) 15- Panel thermostat NC.
10A 250Vac (B13.1)
16- Contactor 4 Poles 80A
230Vac (KM10.1) 17- Mode 4 Control Board
(N14.1) 18- CCS Control board
(A15.2)
19- Service schuko (E11.1) 20- 24Vdc Power Supply
(J11.1) 21- 12Vdc Power Supply
(J11.2)
22- Expansion board (P5.1) 23- Relays board (J4.1) 24- SuperCapacitors Board
(J07.1)
25- Mode 3 (A9.1)) 26- RJ45 Adaptor (X9.3)
27- 12Vdc Relays (K91,
K4.1, K4.2, K8.1, K8.3,
K13.2, K13.4, K15.1)
28- RCBO 1P+N 10A 30mA
class A (Q11.1, Q11.2, Q11.3)