Circontrol Raption 50 Gen2 Series, Service Manual

Page: 62 / 96

58
Raption 50 Series Instruction Manual Raption 50 Series Service Manual
LOCATING THE ERROR:
1 — Which connectors are in error?
Identifying the connector(s) in fault, will indicate us
which components have to be checked. Basically the
ones related with the faulty connector(s).
For example, Mode 3 is related only with AC charging
sessions and CCS board is related only with CCS ones.
2 — In which step of the charging session the error
shows up?
• Charging session does not even start
• During initial checks.
• Starting process.
• Randomly during charging session.
• Stopping process.
• Permanent error.
3 — Does the error appear with a specific car model?
Circontrol performs interoperability tests periodically
with the new brand cars of the market in order to ensure
a correct compatibility between charging stations and
EVs.
Another important point is to locate the error. It is basic to identify which connector
is affected and find in which moment EVSE is going into the error state.
By doing this, components that could cause the erro will be located.