CID TRBC162672, Owner'S Manual

Page: 43 / 68

Xtreme Tree Reaper Brush Cutter
May 2022
43
4.10 BC-65 Drive Bearing Housing Maintenance
Maintenance procedures for the drive bearing housing require special
tools and skills. DO NOT attempt to service drive bearings or gear boxes
unless you have the tools and skills to do so.
1. Check the oil level weekly. Refill with 85W-140 5EP grade gear oil.
2. Check the oil level by removing the oil filler plug. The oil level should
be to the bottom of the oil filler plug
The initial oil should be changed after 50 hours of operation under load.
Subsequent oil changes should take place after every 1000 hours of
operation. More frequent oil changes may be necessary if operating this
cutter in extreme hot conditions.
Checking Fluid Level
Oil Filler Plug
Oil Level