CID TRBC162672, Owner'S Manual

Page: 22 / 68

Xtreme Tree Reaper Brush Cutter
May 2022
22
3.4 How to Start Brush Cutter
1. Complete steps 1-6 in Section 3.2.
2. Set skid steer engine RPM to slightly above idle.
3. Activate skid steer auxiliary hydraulic circuit.
4. Once brush cutter ramps up to speed, increase skid steer engine to full throttle.
Ensure cutter is running smoothly.
Starting the Cutter
Your brush cutter is designed to run off the skid steer loader’s auxiliary hydraulic system,
and is activated and deactivated by a control in the operator’s cab. The height and tilt
functions of your brush cutter are operated with the control handles or pedals in the cab.
Consult your skid steer operator’s manual for instructions regarding these functions.
Hydraulic Flow Requirements
When operating the cutter, set the skid steer engine RPM to a speed that will produce the
required flow. Your skid steer dealer can measure the flow available on your machine and
recommend a throttle setting that is compatible with this attachment.
Brush Cutter Controls
DO NOT exceed the designed flow rate (GPM) of your brush cutter. Place a
check mark in the box next to your cutter model:
TRBC1626 = 16-26 GPM
TRBC1727 = 17-27 GPM
To avoid serious injury or death from thrown objects and flying debris, ensure no
bystanders are within 300 feet of the work area before starting this brush cutter.