CID TRBC162672, Owner'S Manual

Page: 42 / 68

Xtreme Tree Reaper Brush Cutter
May 2022
42
4.9 Blade Installation
Blade Installation Procedure - Brush Cutter On The Ground
1. Install blade bushing.
2. Place blade into position on the blade holder.
3. Install the three blade bolts and blade nuts. Note: Blade bolts are installed from the
bottom up, with the blade nuts visible in the access opening.
4. Repeat steps #1 thru #3 for the remaining blades.
5. Torque bolts to 110 ft-lbs
.
crews by rotating the blade carrier until the capscrews
are visible in the top access opening.
3. After all four blade carrier capscrews are loosened, position one of the
blades in the ac-cess opening and remove the three capscrews securing the
Note: Replacement blades are sold as a set and come pre-balanced from the
factory.