CID TRBC162672, Owner'S Manual

Page: 33 / 68

Xtreme Tree Reaper Brush Cutter
May 2022
33
MAINTENANCE TASK
BEFORE
EACH
USE
WEEKLY YEARLY
Check skid steer loader hydraulic fluid level. Add
fluid as necessary.
Check that all fasteners (nuts, bolts,, washers, pins,
keepers) are in place. Tighten as necessary.
Inspect and replace any worn, torn, or missing
safety decals.
Inspect hydraulic plumbing (hoses and
connectors) for damage or leakage. Repair or
replace hydraulic items as necessary.
Check condition of cutter blades. Sharpen or
replace as necessary.
Check oil level in bearing housing. Add fluid as
necessary.
Change oil in bearing housing.
* Change oil after
50 hours of first time use, then every 1000 hrs or
yearly.
Wash Brush Cutter
• x
Check brush cutter for major scratches and
dings. Sand and repaint these areas to prevent
rust damage. *Use a paint formulated for farm
equipment which can be found at your local
hardware store .
X
X
X
X
X X X
X
X
X
X
4.0 Maintenance Overview Cont.
This brush cutter attachment will provide years of dependable service if routine maintenance
procedures are performed. The maintenance tasks listed below are based on normal
operating conditions. More frequent maintenance may be necessary with intense use or
when operating in adverse environmental conditions.
Only perform service work in a well-lit area.
Allow the machine to cool down before servicing this machine. Hot oils can burn your
skin.
NEVER work under an unsupported cutter deck.
4.1 Maintenance Schedule