Chrysler 2017 Pacifica Owner'S Manual Download Page 759

Page: 759 / 828

2. Press the “Uconnect Theater” button on the touch-

screen. Refer to “Accessing The System From The
Uconnect Radio” in this section for further informa-
tion.

3. Select Disc or USB from the source controls on the

desired screen (1 or 2).

NOTE:

To play a DVD/Blu-ray disc on both screens

simultaneously, select disc from both screen drop downs.

4. Press “Play” button on the touchscreen.

DVD Blu-ray Disc Player

1 — Disc Player (Rear)
2 — Rear Video USB Port

MULTIMEDIA

757

Summary of Contents for 2017 Pacifica




























































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2017 Pacifica

Reviews:

Chrysler 2017 Pacifica, Owner'S Manual, Page: 759 / 828

Search results

Summary of Contents for 2017 Pacifica

Reviews: