Home
/
Chrysler
/
2017 Pacifica
/
Owner'S Manual

Chrysler 2017 Pacifica, Owner'S Manual, Page: 122 / 828

Share

Page: 122 / 828

Chrysler 2017 Pacifica Owner'S Manual Download Page 122

Interior Lighting Off

Rotate the right (instrument panel) dimmer control to the
off position (extreme bottom). The interior lights will
remain off when the doors or liftgate are open.

Parade Mode (Daytime Brightness Feature)

Rotate the instrument panel dimmer control upward to
the first detent. This feature brightens all text displays
such as the odometer, EVIC/DID, and radio when the
position lights or headlights are on.

WINDSHIELD WIPER AND WASHERS

The wipers and washers are operated by a switch within
the wiper lever. Rotate the end of the wiper lever to select
the desired wiper speed.

NOTE:

Always remove any buildup of snow that pre-

vents the windshield wiper blades from returning to the
off position. If the windshield wiper switch is turned off
and the blades cannot return to the off position, damage
to the wiper motor may occur.

Washer And Wiper Controls

120

GETTING TO KNOW YOUR VEHICLE

«
...
120
121
122
123
124
...
»

Summary of Contents for 2017 Pacifica





























































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments