Christie LW502 User Manual Download Page 99

Page: 99 / 127

LW502/LWU502 User's Manual - Operating Guide
020-001057-01 Rev. 1 (06-2016)

SECURITY menu

Item

Description

My Screen

PASSWORD

The My Screen PASSWORD function can be used to prohibit access to the

My Screen function and prevent the currently registered My Screen image

from being overwritten.

1 Turning on the My Screen PASSWORD

1-1 Use the ▲/▼ buttons on the SECURITY menu to

select My Screen PASSWORD and press the ►

button to display the My Screen PASSWORD on/

off menu.

1-2 Use the ▲/▼ buttons on the My Screen

PASSWORD on/off menu to select ON.

The ENTER NEW PASSWORD box (small)

is displayed.

1-3 Use the ▲/▼/◄/► buttons to enter the

password. Move the cursor to the right side

of the ENTER NEW PASSWORD box (small)

and press the ► button to display the NEW

PASSWORD AGAIN box, enter the same

PASSWORD again.

1-4 Move the cursor to the right side of the

NEW PASSWORD AGAIN box and press

the ► button to display the NOTE NEW

PASSWORD box for about 30 seconds.

Make note of the password during this time.

Pressing the

ENTER

button on the remote control or ► button on the

projector returns to My Screen PASSWORD on/off menu.

When a password is set for My Screen:

•

The My Screen registration function (and menu) is unavailable.

•

The My Screen Lock menu is unavailable.

•

The START UP setting is locked on My Screen (and the menu is

unavailable).

Turning the My Screen PASSWORD off allows normal operation of these

functions.

•

Do not forget your My Screen PASSWORD.

2 Turning off the My Screen PASSWORD

2-1 Follow the procedure in 1-1 to display the My Screen PASSWORD on/off

menu.

2-2 Select OFF to display the ENTER

PASSWORD box (large). Enter the registered

password and the screen returns to the

My Screen PASSWORD on/off menu.

If an incorrect PASSWORD is entered, the menu

closes. If necessary, repeat the process from 2-1.

3 If you have forgotten your password

3-1 Follow the procedure in 1-1 to display the My Screen PASSWORD on/off

menu.

3-2 Select OFF to display the ENTER PASSWORD box (large). The 10 digit

Inquiring Code is displayed inside the box.

3-3 Contact your dealer with the 10 digit Inquiring Code. Your password is

sent after your user registration information is confirmed.

(continued on next page)

ENTER NEW PASSWORD

box (small)

ENTER PASSWORD box

(large)

Summary of Contents for LW502
































































































































Search results

Summary of Contents for LW502

Reviews:

Related manuals for LW502

Brands by name

Popular brands

Christie LW502, User Manual

Search results

Summary of Contents for LW502

Reviews:

Related manuals for LW502

Brands by name

Popular brands