Christie LW502, User Manual

Page: 72 / 127

70
LW502/LWU502 User's Manual - Operating Guide
020-001057-01 Rev. 1 (06-2016)
SETUP menu
Item Description
LAMP & FILTER
(continued)
FILTER HOURS
Displays the usage time of the air filter, counted after the last
resetting. It is shown in the
LAMP & FILTER
menu.
Pressing the
RESET
button on the remote control or the ► button
of the projector displays a dialog.
To reset the filter hours, select the OK using the ► button.
CANCEL
ð
OK
• Reset the filter hours only when you have cleaned or replaced the
air filter, for a suitable indication about the air filter.
• For the air filter cleaning, see the section Cleaning and replacing
the air filter (

105
).
FILTER MESSAGE
Use the ▲/▼ button to set the timer for notifying by the message
when to replace the filter unit
1000h
ó
2000h
ó
5000h
ó
10000h
ó
15000h
ó
20000h
ó
25000h
ó
30000h
ó
OFF
After choosing an item except OFF, the message “REMINDER ***
HRS PASSED ....” appears after the timer reaches the interval time
set by this feature.
When the OFF is chosen, the message does not appear. Use this
feature to keep the air filter clean, setting the suitable time according
to your environment of this projector.
• Clean the filter periodically. If the air filter becomes to be blocked
by dust or other matter, the internal temperature rises, which could
cause malfunction, or reduce the lifetime of the projector.
• Be careful with the operating environment of the projector and the
condition of the filter unit.
HDCR LiteLoc
When this function is enabled, automatic image correction is
performed to maintain visibility according to lamp deterioration.
• This function may not work properly when HDCR/eClarity is set to
other than 0.
• This function does not work properly unless LAMP HOURS is
initialized when replacing a lamp.
(continued on next page)