Christie LW502 User Manual Download Page 79

Page: 79 / 127

LW502/LWU502 User's Manual - Operating Guide
020-001057-01 Rev. 1 (06-2016)

MENU PREFERENCES

Item

Description

AUTO BLANK

Using the ▲/▼ buttons switches the mode for the AUTO BLANK

screen.

BLUE

WHITE

BLACK

• To avoid remaining as an afterimage, displayed image changes to

the designated blank color screen by AUTO BLANK after several

minutes at the following conditions.

- When My Screen or ORIGINAL is displayed as BLANK screen.

- When start-up screen is displayed.

START UP

Using the ▲/▼ buttons switches the mode for the start-up screen.

The start-up screen is a screen displayed when no signal or an

unsuitable signal is detected.

My Screen

ORIGINAL

OFF

My Screen : Screen can be registered by the My Screen item (



ORIGINAL : Screen preset as the standard screen.

OFF : Plain black screen.

• To avoid remaining as an afterimage, the START UP screen

changes to the AUTO BLANK screen after several minutes.

• When the ON is selected to the My Screen PASSWORD item in

the SECURITY menu (



), the START UP is fixed to My Screen.

(continued on next page)

Summary of Contents for LW502
































































































































Search results

Summary of Contents for LW502

Reviews:

Related manuals for LW502

Brands by name

Popular brands

Christie LW502, User Manual

Search results

Summary of Contents for LW502

Reviews:

Related manuals for LW502

Brands by name

Popular brands