Christie LW502 User Manual Download Page 58

Page: 58 / 127

LW502/LWU502 User's Manual - Operating Guide
020-001057-01 Rev. 1 (06-2016)

IMAGE SETTINGS menu

IMAGE SETTINGS menu

Select an item from the Image Settings menu using

the ▲/▼ cursor buttons, and press the ► cursor

button or

ENTER

button to execute the item. Then

perform it according to the following table.

Item

Description

BRIGHTNESS

Using the ◄/► buttons adjusts the brightness.

Dark

Light

CONTRAST

Using the ◄/► buttons adjusts the contrast.

Weak

Strong

COLOR

Using the ◄/► buttons adjusts the strength of whole color.

Weak

Strong

• This item can be selected only for a video and component video

signal.

• For HDMI

and HDBaseT

signals, this item can also be select-

ed if either (1) or (2) applies.

(1) DIGITAL FORMAT item in the INPUT menu for selected port is

set to VIDEO.

(2) DIGITAL FORMAT item in the INPUT menu for selected port is

set to AUTO, and the projector recognizes that it receives video

signals.

TINT

Using the ◄/► buttons adjusts the tint.

Reddish

Greenish

• This item can be selected only for a video and component video

signal.

• For HDMI

and HDBaseT

signals, this item can also be select-

ed if either (1) or (2) applies.

(1) DIGITAL FORMAT item in the INPUT menu for selected port is

set to VIDEO.

(2) DIGITAL FORMAT item in the INPUT menu for selected port is

set to AUTO, and the projector recognizes that it receives video

signals.

SHARPNESS

Using the ◄/► buttons adjusts the sharpness.

Weak

Strong

• There may be some noise and/or the screen may flicker for a

moment when an adjustment is made. This is not a malfunction.

(continued on next page)

Summary of Contents for LW502
































































































































Search results

Summary of Contents for LW502

Reviews:

Related manuals for LW502

Brands by name

Popular brands

Christie LW502, User Manual

Search results

Summary of Contents for LW502

Reviews:

Related manuals for LW502

Brands by name

Popular brands