Christie LW502 User Manual Download Page 110

Page: 110 / 127

108

LW502/LWU502 User's Manual - Operating Guide
020-001057-01 Rev. 1 (06-2016)

Maintenance

Other care

To ensure the safe use of your projector, have it cleaned and inspected by your

dealer every year.

Turn the projector off, and unplug the power cord. Allow the projector to cool

sufficiently.

After making sure that the projector is cool adequately, lightly wipe the lens

with a commercially available lens-cleaning wipe. Do not touch the lens

directly with your hand.

If the lens is flawed, soiled or fogged, it could cause deterioration of display

quality. Take care of the lens, being cautious of handling.

►Make sure the power cord is not plugged in, and allow the

projector to cool sufficiently. The high temperature state of the projector could

cause a burn and/or malfunction to the projector.

►Do not clean or service the inside of the projector. Doing it is so dangerous.

►Avoid wetting the projector or inserting liquids in the projector. It could result in

a fire, an electric shock, and/or malfunction to the projector.

• Do not put anything containing water, cleaners or chemicals near the projector.

• Do not use aerosols or sprays.

WARNING

►Incorrect care of the projector could cause not only an injury

but adverse influence such as discoloration, peeling paint, etc.

►Do not use cleaners or chemicals other than those specified in this manual.

►Do not polish or wipe with hard objects.

NOTICE

►Do not directly touch the lens surface with hands.

CAUTION

Inside of the projector

Caring for the lens

Turn the projector off, and unplug the power cord. Allow the projector to cool

sufficiently.

After making sure that the projector is cool adequately, lightly wipe with gauze

or a soft cloth.

If the projector is extremely dirty, dip a soft cloth in water or a neutral cleaner

diluted in water, and wipe lightly after wringing well. Then, wipe lightly with a

soft, dry cloth.

Incorrect care could have adverse influence such as discoloration, peeling paint,

etc.

Caring for the cabinet and remote control

Summary of Contents for LW502
































































































































Search results

Summary of Contents for LW502

Reviews:

Related manuals for LW502

Brands by name

Popular brands

Christie LW502, User Manual

Search results

Summary of Contents for LW502

Reviews:

Related manuals for LW502

Brands by name

Popular brands