Christie LW502 User Manual Download Page 75

Page: 75 / 127

LW502/LWU502 User's Manual - Operating Guide
020-001057-01 Rev. 1 (06-2016)

SETUP menu

Item

Description

OSD MESSAGE

Using the ▲/▼ buttons turns on/off the message function.

OFF

HIDE

■OFF : The following message functions do not work.

“AUTO IN PROGRESS” while automatically adjusting.

“NO INPUT IS DETECTED”

“SYNC IS OUT OF RANGE”

“INVALID SCAN FREQ.”

“NOT AVAILABLE”

“Searching….” while searching for the input.

“Detecting….” while an input signal is detected.

The indication of the input signal displayed by changing.

The indication of the aspect ratio displayed by changing.

The indication of the PICTURE MODE displayed by changing.

The indication of the DYNAMIC IRIS displayed by changing.

The indication of the MY MEMORY displayed by changing.

The indication of “FREEZE” and “II” while freezing the screen by

pressing the

FREEZE

button.

The indication of the TEMPLATE displayed by changing.

The indication of the ECO MODE displayed by changing.

■HIDE : All message functions do not work.

The following buttons function:

STANDBY, ON

• To change this function, follow the steps below.

1. Press the

OSD MSG

button on the remote control for three seconds.

2. The HIDE OSD is displayed.

While this OSD is displayed, press the

OSD MSG

button again

on the remote control.

3. Toggle and change the function.

OFF

HIDE

(continued on next page)

Summary of Contents for LW502
































































































































Search results

Summary of Contents for LW502

Reviews:

Related manuals for LW502

Brands by name

Popular brands

Christie LW502, User Manual

Search results

Summary of Contents for LW502

Reviews:

Related manuals for LW502

Brands by name

Popular brands