Christie LW502, User Manual

Page: 33 / 127

31
LW502/LWU502 User's Manual - Operating Guide
020-001057-01 Rev. 1 (06-2016)
1.
Press the
STANDBY/ON
button on the projector or the remote control.
The message “Power off?” appears on the screen for about five seconds.
Turning off the power
2.
Press the
STANDBY/ON
button again while the message appears.
The projector lamp goes off, and the
POWER
indicator begins blinking in
orange. The
POWER
indicator stops blinking and lights in a steady orange
when the lamp cooling is complete (

112
).
3.
Attach the lens cover, after the
POWER
indicator turns to steady orange.
Do not turn the projector on for about 10 minutes or more after turning it off.
Do not turn the projector off shortly after turning it on. Such operations might cause
the lamp to malfunction or shorten the lifetime of some parts including the lamp.
Power on/off
►A strong light is emitted when the projector’s power is on.
Do not look into the lens of the projector or look inside of the projector through
any of the projector’s openings as the projection ray may cause a trouble on your
eyes.
►Keep objects away from concentrated projection light beam. Blocking the
beam can cause high temperatures to occur and may result in smoke or fire.
►Do not touch around the lamp cover and the exhaust vents during use or just
after use, as it is too hot.
WARNING
• Turn the power on/off in the right order. Power on the projector prior
to the connected devices.
• This projector can automatically turn on/off. Refer to the DIRECT POWER ON
(

83
) and AUTO POWER OFF (

83
) items of the OPTION menu.
NOTE