Christie LW502, User Manual

Page: 21 / 127

19
LW502/LWU502 User's Manual - Operating Guide
020-001057-01 Rev. 1 (06-2016)
(continued on next page)
Setting up
Connecting with your devices (continued)
• This projector has HDMI input/output ports and can be connected to
multiple devices such as projectors or monitors with HDMI cable.
・ The projected image is output when HDMI 1 or HDBaseT is selected.
・ The resolution of the signal input to the projector and signal output from the
projector may be restricted by the maximum resolution of the connected device
such as projector or monitor.
・
HDMI output operation in normal standby depends on the setting of the
menu (

74 ). It is not output during saving standby.
・ When outputting HDMI signal, turn on the output side connected device
before inputting image signal to the projector.
・ Up to 7 devices can be connected in series for HDMI output port of this
projector.
・ The number of devices that can be connected varies depending on HDCP
version, the restriction of the number of devices for HDCP repetition of source
device, and the quality of a cable.
・ The projected image from the projector may be interrupted when POWER
OFF/ON, input switching, or HDMI cable removal/insertion is executed on the
second or subsequent projector or monitor.
・ HDMI output may be interrupted when the projector is turned on/off.
NOTE