Christie D4K35, Setup Manual

Page: 35 / 66

Section 3: Connect Devices to the Projector
D4K35 Setup Guide 3-3
020-100855-02 Rev. 1 (09-2014)
3.1 Connect a Computer or Server
To communicate with the projector from a computer, server or an existing network, connect the equipment to
the Ethernet hub or switch.
For applications or equipment utilizing serial communications, use the Christie-proprietary serial protocol to
connect to the RS232 PIB3G port on the PIB3G. When using Christie serial protocol over Ethernet connect to
port 5000.
NOTICE:
The RS232 PIB3G port located on the PIB3G faceplate utilizes Christie-proprietary
protocol and is intended for Christie accessories or automation controllers only.
Figure 3-3 Connecting Communications