Christie D4K35, Setup Manual

Page: 18 / 66

2-6 D4K35 Setup Guide
020-100855-02 Rev. 1 (09-2014)
Section 2: Installation and Setup
3. If you are using an optional rack stand assemble the rack stand using the instructions provided with the
rack stand.
NOTES: 1)
For better access, wire the LPS before installing it into the rack stand.
2)
Use the
hold down clamp (P/N 116-100101-01) when securing the projector to the rack stand.
4. Install and secure the lamp power supply (LPS) in the rack stand:
a. Remove the right (the operator's side) panel of the rack stand.
b. Remove cross bar.
Figure 2-3 Side View of Rack Stand