Christie CP2208, User Manual

Page: 41 / 94

Managing lamp
information
Learn how to set up and work with a lamp.
This section provides information and procedures for optimizing lamp performance. Optimizing lamp
performance is recommended to make sure you receive the brightest, most uniform image possible for
the life of the lamp.
Creating a new lamp file
Define the lamp used in the projector.
1. Select Menu > Advanced Setup > Lamp Power / LiteLOC Setup.
2. Complete these fields.
Field Description
Power% The percentage of power to supply to the lamp.
Enable LiteLOC ™ Enables or disables LiteLOC ™ . LiteLOC ™ is a power control algorithm
that increases the power level to maintain lamp brightness as the
lamp ages.
Light Meter - Set
Target Enables LiteLOC ™ and maintains the current brightness level for as
long as possible. The Light Meter value is an arbitrary unit of measure,
not lumens or fL.
Amps Lamp current in amperes.
Volts Lamp voltage in volts.
Watts Lamp power in watts.
~fL or ~cd/m2 Approximate Foot Lamberts reading on the light sensor. This assumes
a calibration was performed.
Hours Number of hours the current lamp has operated.
Intensity The current light sensor reading in arbitrary units-of -measure and
does not represent actual lumens or fL.
3. Select Save As.
4. Enter a name for the lamp file in the Filename field.
5. Select OK.
CP2208 User Guide 41
020-101916-03 Rev. 1 (12-20120)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.