manualshive.com logo in svg

Christie CP2208, User Manual

Share
Download
Christie CP2208 User Manual Download Page 20

Connecting devices and establishing
communication

To display content, you must connect a device that is capable of storing or playing content to the

projector.

Projector connections

Item

Description

A

Indicates the status of the regulator. A solid blue LED indicates the regulator is enabled. If the LED is
not illuminated, the regulator is not enabled.

B

• SOFTST—(Software State) Indicates the state of the software application running on the

integrated cinema processor (ICP). During normal operation, this LED blinks. During start up, the
LED changes from off to blinking.

• OSST—(Operating System State) Indicates the state of the ICP operating system. During normal

operation, the LED is green. During start up, the LED changes from off to green.

• FMTST—(FMT FPGA State) Indicates the state of the FMT FPGA circuit. During normal operation,

the LED is green. When the power is turned on, the LED turns green immediately.

• ICPST—(ICP FPGA State) Indicates the configured state of the ICP FPGA circuit. During normal

operation, the LED is green. When the power is turned on, the LED turns green immediately.

C

• PORT B—Indicates the status of the USB port. A green LED indicates the port is active. If the

LED is not illuminated, the port is inactive.

• PORT A— Indicates the status of the USB port. A green LED indicates the port is active. If the

LED is not illuminated, the port is inactive.

D

• STBY—The LED is green when the standby power supply is active. If the LED is not illuminated,

the standby power supply has failed or the projector circuit breaker is off.

Installing and setting up

CP2208 User Guide

20

020-101916-03 Rev. 1 (12-20120)

Copyright 

©

 2020 Christie Digital Systems USA, Inc. All rights reserved.

Summary of Contents for CP2208































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands