manualshive.com logo in svg

Christie CP2208, User Manual

Share
Download
Christie CP2208 User Manual Download Page 83

Lamp suddenly turns off

The lamp unexpectedly turned off.

Resolution

•

Replace the lamp.

LiteLOC

™

 not working

Brightness settings are not being displayed at a constant level.

Resolution

•

If the lamp power is at the maximum setting to maintain a LiteLOC setting, LiteLOC is
automatically disabled. Reduce the LiteLOC setting, or install a new lamp.

Display issues

The following topics cover common display issues and their solutions.

Flicker, shadows, or dimness

The projected image flickers, contains shadows, or is dim.

Resolution

Related information

Aligning the lamp (on page 24)

Blank screen with no display of cinema image

When the projector is turned on, nothing is displayed.

Resolution

•

Ensure the lens cap is not on either end of the lens.

•

Confirm all power connections are still good.

•

Ensure the douser is open by verifying the state of the douser on Main panel.

•

Ensure any test pattern other than the full black test pattern displays properly.

•

Verify the correct display file is selected.

•

For cinema connections, verify the correct port is selected.

Troubleshooting

CP2208 User Guide

83

020-101916-03 Rev. 1 (12-20120)

Copyright 

©

 2020 Christie Digital Systems USA, Inc. All rights reserved.

Summary of Contents for CP2208































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands