manualshive.com logo in svg

Christie CP2208, User Manual

Share
Download
Christie CP2208 User Manual Download Page 7

Changing the channel icon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Adding or removing preferred channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Managing projector setting files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Creating a source file. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Modifying a source file. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Creating a screen file. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Modifying a screen file. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Creating a measured color gamut data file. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Modifying a measured color gamut data file. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Creating a target color gamut data file. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Modifying a target color gamut data file. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Creating a new intelligent lens system file. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Editing an existing intelligent lens system file. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Enabling automatic intelligent lens system adjustments on a channel. . . . . . . . . . . . . . . . . . 52
Resetting intelligent lens system file settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Adding a lens serial number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Enabling an automatic intelligent lens system on a lens. . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Resetting the lens position on projector startup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Completing a full lens calibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Resetting the intelligent lens system and the lens position. . . . . . . . . . . . . . . . . . . . . . . . . 54

Scheduling events. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Scheduling the projector to turn on or off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Editing a scheduled event. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Deleting a scheduled event. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Deleting all scheduled events. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Turning off the scheduler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Viewing and modifying projector settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Setting projector and touch panel controller preferences. . . . . . . . . . . . . . . . . . . . . . . . . . 57
Adjusting projector time settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Adding or modifying projector communication settings. . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Adding a network device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Accessing a network device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Calibrating the internal light meter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Viewing processes and programs running on the projector. . . . . . . . . . . . . . . . . . . . . . . . . 59
Viewing local or remote computer settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Viewing the files on the projector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Content

CP2208 User Guide

7

020-101916-03 Rev. 1 (12-20120)

Copyright 

©

 2020 Christie Digital Systems USA, Inc. All rights reserved.

Summary of Contents for CP2208































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands