background image

Turning the projector on

The projector is turned on using the touch panel controller (TPC).

Warning! If not avoided, the following could result in death or serious injury.

SHOCK HAZARD! Do not attempt operation if the AC supply is not within the specified voltage
and current, as specified on the license label.

1. Ensure that the circuit breaker for the projector is on.
2. On the TPC, select and hold Power On

Logging on to the projector

Log on to the projector to access the touch panel controller (TPC) functions.

1. On the TPC, tap Menu  > Login.
2. From the Username list, select a user name.

Each user account has set user access permissions.

3. In the Password field, type the password.
4. Tap Login.

Activating marriage

You must complete marriage to display encrypted content and to comply with Digital Cinema System

Specification (the DCI specification).
You cannot complete marriage remotely. In addition, an authorized employee must be physically
present to verify that the anti-tamper seal on the card firewall is unbroken, the projector is unaltered,
and to tap the marriage button on the card cage faceplate.

1. On the touch panel controller (TPC), log on to the projector (on page 22) with marriage

permissions.

2. Tap Menu  > Service Setup.
3. Complete the Marriage wizard.
4. Tap Finish.
5. Verify that the marriage ring is installed correctly and an anti-tamper alarm does not appear

on the TPC.

Adding or modifying projector communication
settings

To allow a computer or other devices to communicate with the projector, add the projector to a

network. You can also modify the communication settings if any network information changes.

1. On the touch panel controller (TPC), log on to the projector (on page 22) with administrator or

service permissions.

2. Select Menu  > Administrator Setup > Communications Configuration.

Installing and setting up

CP2208 User Guide

22

020-101916-03 Rev. 1 (12-20120)

Copyright 

©

 2020 Christie Digital Systems USA, Inc. All rights reserved.

Summary of Contents for CP2208































































































Reviews: