manualshive.com logo in svg

Christie CP2208, User Manual

Share
Download
Christie CP2208 User Manual Download Page 84

Severe motion artifacts

The displayed image has artifacts such as smearing and double image perception.

Resolution

•

Verify if there is a synchronization problem with reversed 3-2 pull-down in the 60Hz-to-24Hz
film-to digital conversion, and correct it at the source.

Image is vertically stretched or squeezed

The image appears vertically stretched or squeezed into the center of the screen.

Resolution

Inaccurate display colors

The colors in the image are not what I expected to see.

Resolution

1. In the left navigation menu, select Channel Setup.
2. In the Color Space field, verify that correct value is selected.

Display is not rectangular

The shape of the display is not correct.

Resolution

Display is noisy

The projected image contains noise.

Resolution

•

Verify that the cables connecting the input device to the projector meet the minimum
requirements and are undamaged.

•

Add signal amplification or conditioning if the distance between the input device and the
projector exceeds 25 feet.

•

Turn the projector off and then on again.

Troubleshooting

CP2208 User Guide

84

020-101916-03 Rev. 1 (12-20120)

Copyright 

©

 2020 Christie Digital Systems USA, Inc. All rights reserved.

Summary of Contents for CP2208































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands