Connecting signal to the display panel
You can connect a display panel to video sources, external controllers, and power sources.
Follow these guidelines when you connect equipment to a display panel.
•
Turn off all equipment before making any connections.
•
Use the correct signal cables for each source.
•
For best performance and to minimize cable clutter, use high-quality cables that are only as
long as necessary to connect two devices. For example, avoid using a 20-foot cable if a 6-foot
cable is sufficient.
•
Ensure that the cables are securely connected. Tighten all thumbscrews on connectors that
have them.
Installing and configuring the Remote Power
Rack Shelf
Use the following instructions to install and configure the Remote Power Rack Shelf external power
supply.
Required tools
Make sure the following tools are available during the installation.
Remote Power Rack Shelf installation tools
•
Screwdrivers
•
Molex Crimping Tool (P/N: 154-124108-XX)
If the power cord supplied with your product is not long enough to connect the first display
panel in an array to the Remote Power Rack Shelf module, you must purchase a power cord of
an adequate length. Christie recommends one of the pre-terminated power cables offered as
Christie accessories, or that you create a custom cable using the Christie Main Power Cable
Spool (P/N 154-122106-XX), Connector Kit (P/N 154-125109-XX), and Molex Crimping Tool
(P/N 154-124108-XX). For more information on the Molex Crimping Tool, see the Molex
documentation.
Installing a display panel
FHD553-XE-R and FHD553-XE-HR LCD Panels User Guide
19
020-001198-04 Rev. 1 (01-2019)
Copyright
©
2019 Christie Digital Systems USA, Inc. All rights reserved.
