For best results, use a test pattern that is smooth gray with a clear pattern of black and white pixels,
or a similar "half on, half off" graphic image.
1. Press MENU on the remote control or keypad.
2. Select Advanced Settings > Phase.
3. Adjust the slidebar until the image stabilizes and each pixel is clearly defined.
Changing VGA ADC settings
VGA ADC settings calibrate the analog-to-digital converter (ADC) for VGA sources on a display panel.
1. Press MENU on the remote control or keypad.
2. Select Advanced Settings > VGA ADC Settings.
3. Adjust the settings.
Enabling IRFM
The Image Retention Frame Motion (IRFM) setting creates slight frame motion to help avoid image
retention.
1. Press MENU on the remote control or keypad.
2. Select Advanced Settings > IRFM.
3. Use the arrows to enable this feature.
Setting the baud rate
The baud rate sets the data rate of the RS232 communication link.
1. Press MENU on the remote control or keypad.
2. Select Advanced Settings > Baud Rate.
3. Use the arrows to select a baud rate.
Enabling Smart Light Control
Smart Light Control automatically calibrates the luminance of the display panel using internal sensors.
1. Press MENU on the remote control or keypad.
2. Select Advanced Settings > Smart Light Control.
3. Select one of the following.
•
Consistency—Use this setting to make the luminance of the display panel consistent over
time. The display panel uses internal sensors to compensate for natural drifts in backlight
luminance.
When using Consistency mode, verify that the backlight is set to 90% or less.
•
Video Wall—Use this setting to make the luminance of the display panel match the other
panels in a video wall regardless of unit-to-unit variation or drifts in individual panels over
time. The display panel communicates with the rest of the video wall and attempts to
match its luminance to adjacent panels.
When using Video Wall mode, verify that the backlight is set to 90% or less. All display
panels must be daisy-chained together using the RS485 inputs and outputs.
Updating display settings
FHD553-XE-R and FHD553-XE-HR LCD Panels User Guide
40
020-001198-04 Rev. 1 (01-2019)
Copyright
©
2019 Christie Digital Systems USA, Inc. All rights reserved.
