manualshive.com logo in svg

Christie 135-008109-01, User Manual

Share
Download
Christie 135-008109-01 User Manual Download Page 44

5. Turn off the display panels in the array, and wait at least five seconds.
6. For changes to take effect, after at least 5 seconds, turn on the display panels in the array.

Obtaining the temperature and fan status

Learn how to obtain information about the health of a display panel such as the internal operating

temperature, the cooling fan speed, or the highest temperature reached.

1. Press MENU on the remote control or keypad.
2. Select Advanced Settings > Temperature & Fan Status.

Enabling DisplayPort Multi-Stream Transport (MST)

When you enable DisplayPort MST, display panels in a video wall that are connected using DisplayPort

1.2 are recognized by the control computer as independent display panels instead of a single display.
Before enabling DisplayPort MST, consider the following.

•

The Video Wall setting in the Multi-Display Control menu should be set to Off.

•

The graphics adapter and operating system on the control computer must support MST.

•

MST mode requires high-quality cables that are DisplayPort certified.

•

Depending on the graphics adapter, up to 4 display panels can be daisy-chained in MST mode.

•

In MST mode, the recommended resolution setting for each display panel is 1920x1080. The
maximum resolution of a 2x2 video wall is 3840x2160 at 60 Hz.

1. Press MENU on the remote control or keypad.
2. Select Advanced Settings > DisplayPort MST.
3. Use the arrows to enable DisplayPort MST.

Disabling the OPS Always Powered setting

Learn how to turn off the OPS Always Powered setting.

1. Press MENU on the remote control or keypad.
2. Select Advanced Settings > OPS Always Powered > No.

Performing a factory reset

Learn how to restore all display settings, including image settings, to their factory defaults.
This action is not reversible.

1. Press MENU on the remote control or keypad.
2. Select Advanced Settings > Factory Reset.
3. Use the arrow keys to select Yes.

Updating display settings

FHD553-XE-R and FHD553-XE-HR LCD Panels User Guide

44

020-001198-04 Rev. 1 (01-2019)

Copyright 

©

 2019 Christie Digital Systems USA, Inc. All rights reserved.

Summary of Contents for 135-008109-01



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands