![background image](http://html1.mh-extra.com/html/chief/ez-liner-express/ez-liner-express_user-manual_2600331011.webp)
11
EZ LINER EXPRESS
USERS MANUAL
VII. To Load Vehicle
WARNING
To prevent personal injury or death from explosion or fire:
1. Vehicles with fuel leaks should not be placed on the EZ Liner Express.
2. Fuel tanks must not be removed or replaced on the EZ Liner Express.
3. Cleanup and ventilation of fuel spills is mandatory before operating the electric pump, grinding, welding, drilling or smoking.
1. With the aid of an assistant to guide you, drive vehicle slowly onto the mainframe until vehicle is centered over mainframe. All
wheels should be located on ramps (see Figure 19).
Lift Pad
Support Holder
Figure 19
Figure 20
VIII. Supporting Vehicle
Use Support Stands for all surface work (i.e. sanding, etc.).
CAUTION
DO NOT attempt to make a pull when support stands are installed. Use Anchoring Stands when using a Pulling Tower.
1. Place the Support Holder on the mainframe and locate the Support Holder below structural components at the front and rear
corners of the vehicle’s center section.
CAUTION
To avoid personal injury due to vehicle falling, entire rectangular base of Support Stand must be positioned squarely
on the mainframe.
IMPORTANT
If vehicle’s ground clearance does not allow installation of Support Stands at rack’s lowest level, use appropriate
lifting device to assist the installation process.
2. Place the Lift Pads into the Support Holders (see Figure 20).
Summary of Contents for EZ LINER EXPRESS
Page 1: ...2013 Vehicle Service Group USERS MANUAL EZ LINER EXPRESS ...
Page 30: ...NOTES ...
Page 31: ...NOTES ...