4
EZ LINER EXPRESS
USERS MANUAL
I. Lift Pump Assembly
1. Assemble Pump Holder by placing the handle shaft over
the stem on the base. Insert locking pin at bottom of the
handle shaft (see Figure 1).
2. Place Lift Pump in the Pump Tray (see Figure 2). The Lift
Pump can be identified by having a female disconnect on
the hydraulic outlet and the pump does not have a pressure
gauge.
3. Connect the airline from the Air Valve Tee to the Lift Pump
(see Figure 2).
4. Connect the Safety Latch airline from the lift to the quick
disconnect on the Air Valve Assembly on the side opposite
the Air Valve Tee (see Figure 3).
5. Connect the male end of the hydraulic hose from the lift to
the female disconnect on the Lift Pump (see Figure 2).
6. Connect the shop airline to the open quick disconnect on
the Air (see Figure 3).
Figure 2
Figure 1
Figure 3
Pump Hose
Safety Latch Airline
Shop Airline
Summary of Contents for EZ LINER EXPRESS
Page 1: ...2013 Vehicle Service Group USERS MANUAL EZ LINER EXPRESS ...
Page 30: ...NOTES ...
Page 31: ...NOTES ...