![background image](http://html1.mh-extra.com/html/chief/ez-liner-express/ez-liner-express_user-manual_2600331014.webp)
14
EZ LINER EXPRESS
USERS MANUAL
XI. Install Anchor Stands
1. Install the UMS Adapter in Anchoring Stand Base and position stand at front of the center section on side of vehicle that must
not move with pull (see Figure 27 & 28).
Front Center Rear
Center Section
Control Points
(Also referred to as base
reference points)
Figure 27
Figure 28
2. Prepare a second anchoring stand (as required) and position it on same side of vehicle at rear of center section.
3. Position anchoring stands directly below anchoring locations on pinchweld. Prior to positioning, observe pinchwelds to
determine where clamp jaws should be attached. If possible, select reinforced pinchwelds that are free of obstructions (lines,
etc.). Select locations in corners of center section and avoid locations in center of rocker.
Fastener Bar
Height Adjusting Pin
Locking Collar
Ums Adapter
Clamp Jaws
Summary of Contents for EZ LINER EXPRESS
Page 1: ...2013 Vehicle Service Group USERS MANUAL EZ LINER EXPRESS ...
Page 30: ...NOTES ...
Page 31: ...NOTES ...