CHIEF EZ LINER EXPRESS, User Manual

Page: 15 / 32

15
EZ LINER EXPRESS
USERS MANUAL
Figure 29
Figure 30
Landing Bolt
Fastener Plate
Locating Plate
4. Center locating plate in most convenient tie down hole
below attachment point on pinchweld. Anchoring stand
installs more easily with locating plate positioned in tie
down hole 3 to 4 inches outboard of attachment points.
5. Install anchoring stands on opposite side of vehicle.
Repeat Steps 1 – 4.
6. Raise the mainframe and Anchor Stands up to the vehicle
by pressing the pump portion of the Lift Pump.
7. Align the Anchor Stands so that the pinchweld of the
vehicle is engaged in the clamp jaws.
IMPORTANT
Rocker must rest firmly on top of the clamp jaw
assembly prior to tightening.
8. Secure anchoring stands to mainframe.
a. Install the fastener plates on the bottom of the
mainframe in the same slots as the locating plates.
b. Tighten the Fastener Plates through their respective
locating plates and to the Fastener bars using the
Fastener Plate Bolt.
9. Tighten Clamp Jaws and Locking Collars.
IMPORTANT
Clamp jaws must be retightened after initial
pulls are made. Clamp jaws will seat
themselves during initial pull, resulting in a
loosening of the clamp jaws. Clamp jaws may
slip if not retightened.
Rocker
UMS adapter
Tube
Clamp
Jaw Assembly
Pinchweld
Flange
(End View)
(End
View)