22
EZ LINER EXPRESS
USERS MANUAL
Figure 44
Figure 45
6. Disengage the Safety Latch by pressing the Release Button
on the Air Valve on the Pump Stand (see Figure 44).
7. Lower the vehicle by pressing the release portion on the
pedal of the Lift Pump until the vehicle starts to make
contact with the Wheel Stands (see Figure 44).
8. Make sure that the Wheel Stands are centered on the
vehicle’s tires.
9. Lower the lift completely by pressing the release portion on
the pedal of the Lift Pump (see Figure 44).
10. Remove the Anchor Stands from the mainframe.
Release Button
Pump
Release
11. Place the Support Holder on the mainframe and locate the Support Holder below structural components at the front and rear
corners of the vehicle’s center section (see Figure 45).
CAUTION
To avoid personal injury due to vehicle falling, entire rectangular base of Support Stand must be positioned
squarely on the mainframe.
IMPORTANT
If vehicle’s ground clearance does not allow installation of Support Stands at rack’s lowest level, use appropriate
lifting device to assist the installation process.
Summary of Contents for EZ LINER EXPRESS
Page 1: ...2013 Vehicle Service Group USERS MANUAL EZ LINER EXPRESS ...
Page 30: ...NOTES ...
Page 31: ...NOTES ...