![background image](http://html1.mh-extra.com/html/chief/ez-liner-express/ez-liner-express_user-manual_2600331019.webp)
19
EZ LINER EXPRESS
USERS MANUAL
Figure 39
11. When the tower is no longer needed, push the release
portion of the pedal on the Tower Pump to release
hydaulic
pressure.
12. Detach the tower chain and hook from vehicle,
disconnect the shop airline from the Tower Pump, and
place Tower Pump into Tower Pump Storage Ring.
13. Remove the Tower for the mainframe by pulling the
Insert Plug out of the mainframe port using the handle.
IMPORTANT
Make certain tower head has fully lowered
before attempting to disengage hydraulic hose
from
tower
fitting.
CAUTION
1) Only one pulling device may be used at a time.
2) Only an EZ Liner Express tower or lifting device provided
with this product may be used. No exceptions!
3) DO NOT use tower to make a pull until vehicle is secured
to mainframe.
4) The hydraulic pump pressure is set at 6,100 psi (420 bar).
Any tampering, altering or adjustment to this system, or
the use of any other hydraulic pump with this product, may
cause serious personal injury and/or damage to
equipment and property.
Summary of Contents for EZ LINER EXPRESS
Page 1: ...2013 Vehicle Service Group USERS MANUAL EZ LINER EXPRESS ...
Page 30: ...NOTES ...
Page 31: ...NOTES ...