Captivate. Motivate. Graduate.
Solutions for teaching and research. Made in Canada.
uSer MaNuaL
Q2-uSB data acquisition Board
Set Up and Configuration
Quanser educational solutions
are powered by:
Make sure your Q2-USB Data Acquisition (DAQ) Device includes the following components:
2
1
Quick Start Guide:
Q2-USB Data Acquisition Device
1. Quanser Q2-USB Data Acquisition Device
2. RCA to RCA cable (loopback cable)
3. USB 2.0 cable
4. Quanser Workstation Resources*
(includes User Manual and Quick Start Guide)
3
4
Check Components and Details
STEP 1
Additional Components Required
To complete the Quanser Q2-USB set up, you will need the following:
STEP 2
• LabVIEW™
• NI-DAQmx
• Quanser Rapid Control Prototyping Toolkit®
Install NI LabVIEW™ Add-ons
STEP 3
Make sure LabVIEW™ and required add-ons are installed.
Quanser Rapid Control Prototyping Toolkit for NI LabVIEW™
Visit www.ni.com/labviewtools/rcp
Note:
must be purchased separately.
*Download from the RCP Toolkit Resources at
www.ni.com/labviewtools/rcp.
Note:
The Quanser Rapid Control Prototyping (RCP) Toolkit must be
installed after LabVIEW. See the RCP Toolkit Installation Guide for
more information www.quanser.com/products/rcptk/documentation
ni.com/labviewtools/rcp
RCP Toolkit
