Chevrolet 2007 Kodiak Owner'S Manual Download Page 27

Page: 27 / 430

4. Push the latch plate into the buckle until

it clicks.

Pull up on the latch plate to make sure it is
secure. If the belt is not long enough,
see

Safety Belt Extender on page 41

Make sure the release button on the buckle is
positioned so you would be able to unbuckle
the safety belt quickly if you ever had to.

5. Move the shoulder belt height adjuster to

the height that is right for you. Improper
shoulder belt height adjustment could reduce
the effectiveness of the safety belt in a
crash. See

Shoulder Belt Height Adjustment

on page 35

6. To make the lap part tight, pull up on the

shoulder belt.

It may be necessary to pull stitching on the
safety belt through the latch plate to fully
tighten the lap belt on smaller occupants.

Summary of Contents for 2007 Kodiak















































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Kodiak

Reviews:

Related manuals for 2007 Kodiak

Brands by name

Popular brands

Chevrolet 2007 Kodiak, Owner'S Manual

Search results

Summary of Contents for 2007 Kodiak

Reviews:

Related manuals for 2007 Kodiak

Brands by name

Popular brands