Chevrolet 2007 Kodiak Owner'S Manual Download Page 11

Page: 11 / 430

The recline lever is located on the outboard side
of the driver’s and passenger’s seat cushions.

To recline the seatback, do the following:

1. Lift the recline lever.

2. Move the seatback to the desired position,

then release the lever to lock the seatback
in place.

3. Push and pull on the seatback to make sure

it is locked.

To return the seatback to an upright position,
do the following:

1. Lift the lever fully without applying pressure

to the seatback and the seatback will return
to the upright position.

2. Push and pull on the seatback to make sure

it is locked.

Summary of Contents for 2007 Kodiak















































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Kodiak

Reviews:

Related manuals for 2007 Kodiak

Brands by name

Popular brands

Chevrolet 2007 Kodiak, Owner'S Manual

Search results

Summary of Contents for 2007 Kodiak

Reviews:

Related manuals for 2007 Kodiak

Brands by name

Popular brands