Chevrolet 2007 Kodiak Owner'S Manual Download Page 242

Page: 242 / 430

3. Remove the rubber

cap from the rear
of the chamber.

4. Put the release stud, nut and flat washer into

the chamber.

5. Turn the stud clockwise a quarter of a turn.

6. Turn the stud nut

clockwise several
turns to release
the brakes.
Follow the same
procedure to
release the other
brake or brakes.

7. At the repair facility, apply air pressure of at

least 70 psi (480 kPa) to the brake chambers,
either from an external air supply or the
vehicle’s air system.

8. Turn the stud nut counterclockwise several

turns. Remove the stud from the chamber.

9. Replace the stud and washer and tighten the

nut into the side of the chamber.

10. Replace the rubber cap.

242

Summary of Contents for 2007 Kodiak















































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Kodiak

Reviews:

Related manuals for 2007 Kodiak

Brands by name

Popular brands

Chevrolet 2007 Kodiak, Owner'S Manual

Search results

Summary of Contents for 2007 Kodiak

Reviews:

Related manuals for 2007 Kodiak

Brands by name

Popular brands