Chauvin Arnoux Metrix MTX 3292B, User Manual

Page: 11 / 55

11
3.2.5. Alert signal
An intermittent audible signal is emitted:

in the "Voltage" setting, when the range is exceeded
(
MANUal and AUTO mode - last range)

in the "Current" setting, when the range is exceeded
(
MANUal mode), starting from a measurement of 10 Amperes

when the connection of the leads is incompatible with the function selected

when the danger thresholds are exceeded (if the function is validated)
When the range is exceeded, the audible signal is accompanied by display
of the "
O.L " acronym.
When the symbol is activated:

the voltage on the "Volt" input exceeds 60 VDC or 25 VAC

the current injected between the "Ampere" terminal and COM exceeds 10A

the range (voltage or current) is exceeded in MANUAL mode
4. USE
Description of the SETUP menu 4.1.
The SETUP menu configures the parameters of the multimeter according to the conditions of use and user's
preferences.
This menu proposes the main settings or configuration of the multimeter on
3 levels. The configurations are
stored when the multimeter is switched off if the USER (USR) mode is active; or with the configuration frozen
by the user in LOCKED mode. If this is not the case ( BASIC mode), the instrument starts up with the PLANT
configuration parameters. The menu that is not available is greyed out.