26
5.2.5.
Procedure
1.
Press function A, then select the coupling according to your measurements: AC,
DC, AC+DC (AC+DC is default)
2.
Connect the black lead to the COM terminal, the red lead to A, and the probe
tips in series between the source and the load as shown below:
3.
Read the measurement indicated on the main display unit. Look up the graph of
the trend values >1min28s if it is activated. Look up the secondary measurements if they
are activated (activated by Meas…
MEAS+).
4.
It is possible to display the specifications of the range for metrology or a
RELative measurement.
5.
Surveillance of voltage
SURV
or Recording
MEM
of data internal to the
multimeter
"OL" is displayed if the current available I >20A.
6.
View the waveform of a current in the 10 Hz
– 600 Hz band
Current measurement with clamp
5.3.
5.3.1.
Connecting the multimeter
Current clamp with current output connected to the multimeter
Current clamp with voltage output connected to the multimeter
Summary of Contents for Metrix MTX 3292B
Page 54: ...54...
Page 55: ...55 X04854A02 Ed 01 02 2019...
