Chauvin Arnoux Metrix MTX 3292B, User Manual

Page: 13 / 55

13
Util 2/2: Language and clock

: Selection of one of the two languages loaded. Four
combinations of two languages are available: English/Italian,
English/Spanish, English/German, and English/French. As default, the
multimeter contains English/French. The other combinations can be
downloaded from:
www.chauvin-arnoux.com

: Is used to set the system date and time. They are
set
using the and keys
Com 1/1: Communication parameters

: IR/BT : choice of communication :
-
IR/USB
- Bluetooth (if the instrument has the option)

: parameterizing of the infrared transmission rate from among
9600/19200/38400 (default) baud; the other transmission parameters are fixed (8 data bits, 1
stop bit, no parity)

: choice of MODBUS or SCPI
Energy 1/1: Characterization of the power supply

: choice of type :
-
Ni-MH battery
-
Alkaline primary battery

: parameterizing of the capacity of the storage battery in mAh; the charge on
the default primary batteries is 2500mAh.
1. Place the storage batteries in the multimeter, then connect the charger.
2. The LEDs light alternately around the switch to indicate that charging is in progress.
3. Press ON to switch the multimeter on and track the course of the charging by
plateau.
Average charging time: 6h (with 2500mAh storage batteries).
After 1h of recharging, the multimeter is ready for measurements, by pressing ON again; the level of the plateaus acquired is
valid only after a full charge of the instrument.